https://cadviewer.com/autoxchangetechdocs/Recent content in AX2026 Documentation on AutoXchange 2026 Technical DocumentationHugo -- gohugo.ioen-usFri, 06 Feb 2026 01:48:02 +0000https://cadviewer.com/autoxchangetechdocs/operation/versions/Sat, 17 Oct 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/operation/versions/DWG Versions AutoDesk does not change the AutoCAD Drawing File Format nearly as frequently as it releases new versions, at least recently. In the early days the DWG file format was changing with pretty much every release, but while the format change for AutoCAD 2013, it did not change again until AutoCAD 2018, despite yearly releases of the program. So, the same file format was used for AutoCAD 2013, AutoCAD 2014, AutoCAD 2015, AutoCAD 2016 and AutoCAD 2017.https://cadviewer.com/autoxchangetechdocs/concepts/definitions/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/concepts/definitions/AutoCAD Handle The unique identifier that all AutoCAD entities have that remains the same throughout the life of the drawing. Even if other entities are added or deleted and the drawing is saved, the Handle persists through the life of drawing. The handle is a 16-character Alphanumeric identifier. Database Key The identifier that uniquely identifies data in a Database Table Room Layer A layer (or layers) that define where area outlines can be found.https://cadviewer.com/autoxchangetechdocs/introduction/ax2020/Thu, 01 Jan 2026 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/introduction/ax2020/Tailor Made Software’s® AutoXChange 2026™ (also known as AX2026) is a command-line interface application designed to convert AutoCAD DWG, DXF and DWF and MicroStation DGN format files into a wide variety of formats including: Scalable Vector Graphics (SVG) Adobe Portable Document Format (PDF) AutoDesk’s Drawing Web Format (DWF) Joint Photographer’s Expert Group (JPEG) Compuserve Graphics Interchange Format (GIF) Portable Network Graphics (PNG) Tagged Image File Format (TIFF) and about 50 other formats.https://cadviewer.com/autoxchangetechdocs/introduction/whatisbest/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/introduction/whatisbest/We are often asked what the best format is to use. Assuming there are no pre-determined requirements, then the answer to this question can be one of the most important decisions made in a project. Obviously, if there are predetermined requirements, then the best format to use is the one called for in those requirements, unless you can get them changed. We are often asked what the best format is to use.https://cadviewer.com/autoxchangetechdocs/introduction/layers/Thu, 01 Jan 2026 01:26:15 +0000https://cadviewer.com/autoxchangetechdocs/introduction/layers/For those formats such as DWF that support layers, AutoXChange 2026 will create a layer for each layer in the DWG or DXF file that has visible items on it. If the layer does not have anything visible on it, then no layer will be created. So, it is possible for the resulting file to have fewer layers on it than in the original file. AutoXChange will maintain the layer status defined in the original CAD file.https://cadviewer.com/autoxchangetechdocs/json/json-general-parameters/Mon, 26 Sep 2022 00:00:00 +0000https://cadviewer.com/autoxchangetechdocs/json/json-general-parameters/The General Parameters are all parameters that define how the conversion process is done, but not dealing with Block or Layer manipulation. The following parameters can be currently listed in the JSON Parameter File: Input File Name Output File Name Output Format Font Path License Path XRef Path View Layout NOTE: From AutoXchange version 23.05.80 the supported JSON commands are being extended to include the entire set of AutoXchange commands as listed in the Parameter Interface section.https://cadviewer.com/autoxchangetechdocs/parameter_interface/general/Thu, 27 Jan 2022 01:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/general/Parameters Parameter Name JSON Name Purpose B Background Background BA BlankAttributes Blank Attributes BW BlackWhite Bi-tonal output (Black and White only) BL BreakByLayer Break By Layer BLDG Building BN BlockName BlockName CP Codepage Codepage CSV CSV Create Data File (Comma Seperated Value or CSV) DF DefaultFont Default Font DI DefaultItalicFont Default Font Italic A or US DrawingSize Drawing Size ARCH Arch US Architectural Drawing Size DIN DIN German (DIN) Drawing Size EXT Extents Extents FLR Floor HP HighPrecision High Precision HIS Program History IA Invisible_Attributes Invisible Attributes LANGUAGE Language Sets Default Unicode Language LAY Layout Layout LWMIN LineWeightMinimum Line Weight Minimum LW LineWidthScale Line Width Scale MA Margin Margin NOEXTENTS Extents No Extents NOTS NoTextScale No Text Scale ORNT Orientation Orientation OL OutputList Output List VARIOUS PDF Document Information MP and UP PDF Passwords Q Quiet Quiet Mode (No messages output) ROT Rotation Rotation TAG AttributeName Attribute Name SAVEDWG SaveDwg Save as DWG SP SpaceMode Drawing Space Mode LWTMIN Thumbnail Line Weight Minimum THUMBSIZE Thumbnail Size TREATAS TreatAs Treat As UN Units Units VW View View ?https://cadviewer.com/autoxchangetechdocs/troubleshooting/fontrendering/Sat, 16 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/troubleshooting/fontrendering/The letters in the text are rendered as either Question Marks (#1) or small boxes. This is indicative of the font not being found. Since the proper font was not found a different font was substituted in the cases where only ANSI letters were found in the text string causing the text to overflow their box (#2). Check to see what Unmapped Fonts were found in the drawing by looking in the “ax_unmapped_fonts.https://cadviewer.com/autoxchangetechdocs/installation/windows64/Thu, 01 Jan 2026 01:26:15 +0000https://cadviewer.com/autoxchangetechdocs/installation/windows64/AutoXChange 2026 is usually shipped in a ZIP archive. This is because many companies have virus scanning software that will not allow .exe file attachments. You will need to extract the installation program from the Zip archive. You will then locate and double-click the installer icon (“ax2026W64.exe”). When the first Installer wizard appears, proceed through the wizard panes and do the following: Pick the destination directory for the AutoXChange 2026 software installation, if you want to install the software in a directory other than the default.https://cadviewer.com/autoxchangetechdocs/installation/linux/Thu, 01 Jan 2026 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/installation/linux/AutoXChange 2026 for Linux is shipped as a tar.gz file. The executable is called “ax2026_L64_NN_MM_PP” (where NN is the major version number, MM is the medium version number and PP is the minor version number - so AX2026 Linux 64-bit V1.00.06 would be ax2026_L64_01_00_06) but you can rename it to whatever you want. After downloading the executable file, transfer it to the directory of your choice. Rename it if you wanthttps://cadviewer.com/autoxchangetechdocs/operation/operation/Wed, 17 May 2023 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/operation/operation/You can configure a process on your server that makes use of AutoXChange 2026 in two ways: process single files or collections of files in a single session use a kron-type application to run AutoXChange 2026 at set times to scan a particular folder/directory and automatically convert all files loaded into this folder—storing the converted images in a designated destination directory. You should note down a list of files you want to convert, record the exact directory pathways for source and destination directories, and have some idea of which custom parameters you’d like to apply to the conversion process.https://cadviewer.com/autoxchangetechdocs/parameter_interface/view/Thu, 27 Jan 2022 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/view/View and Size Processing Parameters model ModelSpace last Last Saved View view Specific View paper First PaperSpace View basic ModelSpace and all Views BN BlockName A or US Drawing Size EXTENTS Extents HEIGHT Height WIDTH Width LAY Layout Name SIZE Size SP Drawing Space Mode VW Views IB Ignoring AutoCAD-Blocks Model PARAMETER Model Purpose Selects the Model Space of the Input drawing Example -model JSON {“SpaceMode”: “Model”} Alias See View section Use DWG/DXF/DGN Only Last PARAMETER Last Purpose Converts the last saved view.https://cadviewer.com/autoxchangetechdocs/parameter_interface/inoutparameters/Wed, 06 Jan 2021 01:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/inoutparameters/Input/Output Parameters I Input File/Directory Name O Output File/Directory Name F Output Format FPATH Font Path LOG Log File Name LPATH License Path RASTER Creates Raster-based SVG/SVGZ REPOSITORY Repository TREATAS Treat as XPATH External Reference Path Input File PARAMETER i Purpose This parameter defines the input file name. Notes You can use wildcards to perform multiple file conversions. * will match any remaining character(s). ? will match any given character.https://cadviewer.com/autoxchangetechdocs/json/json-layer-status-parameters/Sat, 18 Apr 2020 00:00:00 +0000https://cadviewer.com/autoxchangetechdocs/json/json-layer-status-parameters/The Layer Status Parameters are all parameters that define how layer status is manipulated. The following parameters can be currently listed in the JSON Parameter File: Layer Off Layer On Room Layer (or RL, either is acceptable) Text Layer (or TL, either is acceptable) Handle Layer (or HL, either is acceptable) All Layer Status parameters are optional. { "Layers": { "Off": [ "G-ANNO-TTLB", "A-ELEV" ], "On": [ "0" ], "RL": [ "RM$" ], "TL": [ "RM$TXT" ] } }https://cadviewer.com/autoxchangetechdocs/parameter_interface/layers/Wed, 06 Jan 2021 01:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/layers/Layer Parameters Parameter JSON Description HATCHLAYER HatchLayer Hatch Layer, used for various data mining routines INCLUDEALL IncludeAll Include all layers in the output file. Layer visibility will be dependent on layer visibility in the input file. LOFF LayersOff Turn off the layers listed and turn all other layers on LON LayersOn Turn on the layers listed and turn all other layers off PARTOFF PartOff Turn off the layers listed but do not change other layers PARTON PartOn Turn on the layers listed but do not change other layers ROOMLAYER RoomLayer Room Layer, used for various data mining routines SHOWALL ShowAll Include and Force display of all layers in the output file TEXTLAYER TextLayer Text Layer, used for various data mining routines LT Layer Table File Name Note: These JSON Parameters are in the “Layers” section, not the “General” sectionhttps://cadviewer.com/autoxchangetechdocs/installation/fonts/Thu, 01 Jan 2026 01:11:15 +0000https://cadviewer.com/autoxchangetechdocs/installation/fonts/In order to use something other than the built-in stick font in AutoXChange 2026, you have to have the proper font file on the system. There are two types of font files used in AutoCAD drawings: SHX and TTF. SHX stands for “AutoCAD Compiled Shape File”, “compiled” because they take AutoCAD Shape Files (.SHP), run them through a processor and produce a SHX file. SHX files have been around for over 30 years and were the only AutoCAD fonts for many years.https://cadviewer.com/autoxchangetechdocs/troubleshooting/programwillnotrun/Sat, 16 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/troubleshooting/programwillnotrun/If you try to run AutoXChange and get back “Permission denied” immediately then, most likely, the file permissions are such that you do not have execute permission. $./ax2020 -ver ./ax2020: Permission denied Check to see if the executable has execute (and read) permission $ls -al ax2020 -r--r--r--. 1 scott scott 69269264 May 15 07:58 ax2020 Change the file permissions to include at least read and execute. The normal permission would be 755, only allowing write permission for the owner.https://cadviewer.com/autoxchangetechdocs/parameter_interface/layertable/Fri, 15 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/layertable/Each section of the Layer Table Status File will start with a section definition line. The keyword will be enclosed in brackets: [ON] : Subsequent lines will define those layers to be on. All other layers will be off. [OFF]: Subsequent lines will define those layers to be off. The All other layers will be on. [FORCE ON]: Subsequent lines will define those layers to be on. The status of any other layers will not be affected.https://cadviewer.com/autoxchangetechdocs/json/json-counting-blocks-parameters/Tue, 21 Apr 2020 00:00:00 +0000https://cadviewer.com/autoxchangetechdocs/json/json-counting-blocks-parameters/JSON Block Counting Parameters The Block Counting Parameters are all parameters that define how block references (usages of a block) can be counted. There are no corresponding normal parameters to this section. Blocks can only be counted via the JSON file. For each block to be counted, the block name must be listed. A File name can be listed. It will default to the same name and location as the output file (or the input file if no output is listed) with the extension of “.https://cadviewer.com/autoxchangetechdocs/operation/commandline/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/operation/commandline/The following is the basic AutoXChange 2026 command syntax: AX2026 -i=<INPUT FILE > -o=<OUTPUT FILE> -f=<FORMAT> The main elements of every command are (1) the actions, and (2) any parameters that affect the output. All command parameters are preceded by a dash (-). Some parameters will be noted as letters and others will be noted as numbers, while others (such as directory paths) will follow the dash with a space and then a text string—as shown in the previous example.https://cadviewer.com/autoxchangetechdocs/concepts/linkage/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/concepts/linkage/One of the major abilities of AutoXChange 2026 is to allow the easy linkage between drawings and data. Especially when using our CadViewer viewer, AutoXchange can automate the creation of linkages based on data in the drawing or use existing hyperlinks that have already been defined in the drawings. See more details on database linkages processing in the sections: Automated Area Linkage Handle-based Automationhttps://cadviewer.com/autoxchangetechdocs/operation/batchfile/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/operation/batchfile/AutoXChange 2026 does not support wildcards or any other method of converting multiple files at a time. However, it is easy to automate the conversion process using batch files on both Windows and Linux that do support multiple files and processing subdirectories. Windows The following batch file will convert all DWG files in the current directory and any subdirectories to PDF. The batch process calls processFile to convert each dwg file found in the current directory.https://cadviewer.com/autoxchangetechdocs/parameter_interface/outputformatting/Fri, 13 Aug 2021 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/outputformatting/Output Formatting Parameters PARAMETER JSON Description CSV CSV Create Data File (Comma Separated Value or CSV) HP HighPrecision High Precision LWMIN MinimumLineWidth Line Weight Minimum LW LineWidthScale Line Width Scale MA Margin Margin NOEXTENTS Extents No Extents NOTS No Text Scale Create CSV File PARAMETER CSV Purpose This parameter forces the converter to create a comma separate value format file (CSV) containing an sequence number and text or attributes from a drawing.https://cadviewer.com/autoxchangetechdocs/troubleshooting/permissiondenied/Sat, 16 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/troubleshooting/permissiondenied/If you try to run AutoXChange and it displays the normal header but then displays “sh: gateway.txt: Permission denied” or something similar the output file cannot be written then, most likely, the file permissions are such that you do not have write permission in the directory where the program was run from or where the output is being written (if different). Check the directory permissions (not any particular file, but the directory itself) $ls -al .https://cadviewer.com/autoxchangetechdocs/json/json-block-manipulation-parameters/Fri, 17 Apr 2020 00:00:00 +0000https://cadviewer.com/autoxchangetechdocs/json/json-block-manipulation-parameters/The Block Modification Parameters are all parameters that define how block attributes can be manipulated. There are no corresponding normal parameters to this section. Blocks can only be manipulated via the JSON file. For each block to be modified, the block name and an optional handle for a Block Reference must be listed. If the Handle is listed then only that Block Reference is modified. If the Handle is not listed then all Block References for that Block Name are changed.https://cadviewer.com/autoxchangetechdocs/concepts/arealinkage/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/concepts/arealinkage/Automated Area Linkage is based on the spatial relationship between area polygons (polygons that are defined in the drawing to outline rooms or other types of areas on the drawing) and some sort of identifying text or attribute that can act as the key to the database. By “spatial relationship” we mean that the text (Room Name, Part Number, etc.) is preferably physically inside, but at least the closest text to the center of the room outline, on a given layer(s).https://cadviewer.com/autoxchangetechdocs/operation/fontmapping/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/operation/fontmapping/Font Mapping AutoXChange 2026 allows the user to define mapping for fonts using a configuration file. This mapping file can be used for both SHX and TrueType fonts. The user can map fonts using the “ax_font_map.txt” file. The format is very simple. Each font is listed as a separate line listing the Font Name, the symbol “==>” and then the new font. For instance, “WeirdFont.TTF==>Arial”. The Font Mapping file can also be used to specify fonts that should be stroked out.https://cadviewer.com/autoxchangetechdocs/operation/defaultfontselection/Thu, 22 Dec 2022 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/operation/defaultfontselection/Default TTF Selection AutoXChange can automatically set the Default TrueType Font based on the CodePage defined in the AutoCAD DWG drawing. If the CodePage is not defined then the Default Font will be Arial.ttf. See the section Font Parameters from the Parameter Interface for more details and direct parameter controls. Standard TTF mapping overview graph TD C{CodePage} C -->| CP_ASCII CP_8859_1 CP_8859_2 CP_8859_3 CP_8859_4 CP_8859_5 CP_8859_6 CP_8859_7 CP_8859_8 CP_8859_9 CP_DOS437https://cadviewer.com/autoxchangetechdocs/troubleshooting/fontinstallnosudo/Tue, 26 May 2020 12:16:15 +0000https://cadviewer.com/autoxchangetechdocs/troubleshooting/fontinstallnosudo/Installing Linux fonts (see Font Installation) normally requires SUDO permission to copy the font file to /user/share/fonts and to run fc-cache. However, if you do not have SUDO permission on your system (for instance, on a shared server) there is a work-around. You can use the Font Mapping file (ax_font_map.txt) to map a font to a given TrueType Font file. This works just like a normal Font Mapping but you give the full path and not just the file name.https://cadviewer.com/autoxchangetechdocs/json/json-variables/Sun, 17 May 2020 00:00:00 +0000https://cadviewer.com/autoxchangetechdocs/json/json-variables/Setting Variables AutoXChange will work with variables added by the user in their DWG, DXF or DGN files. Variables can start and end with either three dollar signs or three percent signs - $$$ or %%%, so “%%%variable%%%”. There are no corresponding normal parameters to this section. Variables can only be set via the JSON file. AutoXChange will replace the variable name in the file with the text defined in the JSON parameters, with the exception of four special variables:https://cadviewer.com/autoxchangetechdocs/troubleshooting/windowsisfontinstalled/Sat, 16 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/troubleshooting/windowsisfontinstalled/On Windows it is fairly involved to see if a font is actually installed. You could go to Microsoft Word and see if you can use the font, but that only says the font is installed for that user. The proper way is to check the System Registry. You DO NOT want to alter the registry, but the program you will use is capable of that. Just make sure you make any changes and don’t save any of the changes that you did not make.https://cadviewer.com/autoxchangetechdocs/parameter_interface/orientation/Fri, 15 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/orientation/Orientation Parameters Parameter Name JSON Name Purpose ORNT Orientation Orientation ROT Rotation Rotation LANDSCAPE Landscape Orientation PORTRAIT Portrait Orientation SAVEDWG SaveDwg Save as DWG UN Units Units Orientation PARAMETER ORNT Purpose This parameter defines whether the output will be in landscape or portrait orientation. Values -1: Calculate best fit 0: Landscape 1: Portrait Example -ORNT 1 JSON {“Orientation” : “Portrait”} Alias -R n -LANDSCAPE: -R 0 -PORTRAIT: -R 1 Use With all graphic formats Landscape PARAMETER LANDSCAPE Purpose This parameter forces the output to be in landscape (horizontal) orientation.https://cadviewer.com/autoxchangetechdocs/operation/sampleconversion/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/operation/sampleconversion/To customize the conversion of any output files, you can type additional parameters following the “-o=” entry. For example, you may want to customize output as detailed here: -- Convert a .DWG file to SVG file(s) for display in CADViewer. The conversion will create a SVG file for the DWG Model Space as well as all PaperSpace Views in DWG: ax2020 -i=<SOURCE_FILE.DWG> -o=<NEW_FILE.SVG> -f=SVG -basichttps://cadviewer.com/autoxchangetechdocs/concepts/handles/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/concepts/handles/Sometimes the key for the database file is either not present in the drawing or is actually the AutoCAD Handle (the unique identifier that all AutoCAD entities have that remains the same throughout the life of the drawing). For these drawings we do a variation on Automated Area Linkage where the Database Key is the AutoCAD Handle and that is what is passed to the JavaScript (or other) function. The layer for the area outline (“Room Polygon”) is defined by the Room Layer (RL) parameter.https://cadviewer.com/autoxchangetechdocs/parameter_interface/color/Sat, 06 Jun 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/color/Color Parameters Parameter JSON Parameter Description B Background Background BW ForceBlack Black and White GS GreyScale Greyscale Color Palette The color palette differs depending on the input format and, for AutoCAD, background color. AutoCAD Light Background Palette AutoCAD Dark Background Palette DGN Palette DWF Palette Background PARAMETER B or BAC[KGROUND] Purpose This parameter defines whether the background of the output image is black, white or another color. The color table is based on the color table for the input format.https://cadviewer.com/autoxchangetechdocs/concepts/rastersearch/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/concepts/rastersearch/Raster files (PNG, GIF, BMP, JPG, etc.) will often have a path defined when they are referenced into the AutoCAD drawing (here we are talking about external files that are referenced in the drawing, not raster images that are placed into the AutoCAD file like OLE Objects). This path will often point to a place on the user’s file system that is not accessible if the AutoCAD drawing is moved to another system.https://cadviewer.com/autoxchangetechdocs/parameter_interface/mysql_parameters/Tue, 12 Jul 2022 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/mysql_parameters/The following parameters define the methods for storing data in MySQL databases. Other databases can be supported, but the default is MySQL. MYSQL Parameters MSPORT MySQL Port MSUSER MySQL User MSPWD MySQL Password for the user MSUSERN[AME] Name to use as ID in Users Table MSEMAIL Email address to use in Users Table MSORG[ANIZATION] Organization to use in Users Table MSDATA[BASE] MySQL database name MSUSERT[ABLE] Name of MySQL Users Table MSDRAW[ING] Name of MySQL Drawing Table MSLAYER[S] Name of MySQL Layers Table MSLAYO[UTS] Name of MySQL Layouts Table MSTEXT Name of MySQL Text Items Table MSBLOCK[S] Name of MySQL Blocks Table MSATTRIB[UTES] Name of MySQL Attributes Table MySQL Port PARAMETER MSPORT Purpose This parameter specifies the port to be used for the MySQL connection.https://cadviewer.com/autoxchangetechdocs/parameter_interface/database/Thu, 27 Jan 2022 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/database/The following parameters define the methods for making Database Linkages. See Database Linkages for the description of how this works. Database Parameters HB Handle Based RL Room Layer TL Text Layer AK Attribute Key BLOCKNAME Block Name to process BLOCKNAMELAYER Layer to get Block Names from IA Invisible Attributes IGNOREATTRIBUTES Ignore Attributes BA Blank Attributes BNA Block Name Attribute TLTAG Text Layer Attribute Tag TAG Text Layer Attribute Tag LA Layer Area TLPOSTFIX Text Layer Postfix IB Ignoring AutoCAD-Blocks NOHYPERLINKS Ignore Hyperlinks Handle Based PARAMETER HANDLE BASED Purpose This parameter specifies that Handle Based Database Linkages are to be created.https://cadviewer.com/autoxchangetechdocs/concepts/svg/Tue, 09 Jun 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/concepts/svg/AutoXchange extends the standard SVG entities using custom tags. These extensions provide the retention of additional CAD related information in the resulting SVG file. All AX2024 SVG Extentsions are described in this Guide: Guide - How CADViewer uses SVG.https://cadviewer.com/autoxchangetechdocs/parameter_interface/attribute_modification/Tue, 23 Sep 2025 00:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/attribute_modification/This command allows Blocks to be modified, where Attributes can be added/modified for each Block. Command Line <inputfile>.dwg -europ=<json_command_file>.json This command-line utilizes the JSON command file to define other needed parameters. Alternatively, the command line can be expanded, and the Parameters Section can be omitted in the JSON command file. This would yield the command line: <inputfile>.dwg -europ=<json_command_file>.json -rl=EP-SUPERFICI -bl=“EP-RISCHIO MEDIO” -tltag=“COD_LOCALE” The Definitions and Areas sections of the JSON command file are still required to modify block attributes.https://cadviewer.com/autoxchangetechdocs/parameter_interface/handlebased/Sun, 17 Jan 2021 08:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/handlebased/The following parameters defines the methods for retaining all geometrical objects defined by a Handle in an AutoCAD DWG or DXF file . Database Parameters Parameter Name JSON Name Purpose HL HandleLayer Handle Layer HLALL HLALL Handle Layer All Handle Layer PARAMETER HL Purpose This parameter specifies each of the layers in the drawing that shall retain the original geometry (no optimization) and their AutoCAD Handle. The handle is set for each object in the SVG through the attribute cvjs:handle=“handlexxxxxxxx” and furthermore, the class definition for each Handle processed object contains cvjs_handles as well as the entity type using the AutoCAD syntax AcDbxxxxxxx.https://cadviewer.com/autoxchangetechdocs/parameter_interface/fonts/Wed, 22 Apr 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/fonts/Font Parameters Parameter JSON Parameter Description FPATH Font Path Font path location CP CodePage Codepage DF DefaultFont Default Font DI DefaultItalicFont Default Font Italic DEFAULTSHX DefaultShx Default SHX Font DEFAULTBIGFONT DefaultBigFont Default Big Font LAN Language Default Language STROKE StrokeText Stroke out Text STROKEALLSHX StrokeAllShx Stroke All SHX SVGTOL SvgCoincidentTolerance SVG tolerance Font Path PARAMETER FPATH Purpose This parameter allows the specification of an alternate location for the font files.https://cadviewer.com/autoxchangetechdocs/parameter_interface/watermark_parameters/Wed, 13 Jul 2022 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/watermark_parameters/The following parameters define the methods for defining Watermarks to be added to drawings. These parameters work for both SVG and PDF output, but not for Raster output. Watermark Parameters WM_CONTENT Content of the watermark WM_LAYOUT AutoCAD Layout, default is ModelSpace WM_ANCHOR Handle of line or point to define position WM_X Horizontal (X) position WM_Y Vertical (Y) position WM_ANGLE Text angle (assume radians, append a ’d’ for degrees) WM_FONTSTYLE TextStyle Font Style to use WM_COLOR AutoCAD Color Index WM_RGB Color by RGB values The basic call for the Customer Watermark: -wm_con=“Plot created on/P$$$sysdate$$$” -wm_layout=plan - wm_anchor=90B23A5 -wm_height=6 -wm_x=10 -wm_y=5 -wm_angle=30dhttps://cadviewer.com/autoxchangetechdocs/parameter_interface/pdf/Fri, 15 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/pdf/PDF Only Parameters AUTHOR Author name DENY Deny permission to perform operations KEYWORDS Document Keywords SUBJECT Document Subject TITLE Document Title MP PDF Master Password UP PDF User Password Author PARAMETER AUTHOR Purpose This parameter defines the Author name that is placed in the PDF Document Summary. It is a text string. Use PDF Only Deny PARAMETER DENY Purpose This parameter defines permissions that can be revoked for different operations on the PDF file.https://cadviewer.com/autoxchangetechdocs/parameter_interface/raster/Fri, 15 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/raster/The following parameters are just used when converting to raster formats like JPEG, GIF, PNG and TIFF or used when creating a raster SVG. Raster Processing Parameters AU Input File/Directory Name RHT Raster Height RSZ Raster Size SIZE Raster Size RWD Raster Width Autotrim PARAMETER AU Purpose Defines whether raster images should be trimmed of excess “white space” or not. If Autotrim is on any white area around the drawing image will be trimmed from the image.https://cadviewer.com/autoxchangetechdocs/parameter_interface/svg/Thu, 04 Sep 2025 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/svg/SVG Only Parameters Parameter JSON Description BLOCKS CreateBlocks Blocks BL BreakByLayer Break By Layer BLDG Building FLR Floor LA ListArea List Area LWTMIN Thumbnail Line Weight Minimum POSTFIX Postfix Postfix String RASTER Raster Creates a raster-based SVG or SVGZ file THUMBSIZE Thumbnail Size SIZE SVG coordinate space PRECISION SVG Coordinate precision Blocks PARAMETER BLOCKS Purpose This parameter controls whether blocks are created in the SVG file (as group codes) or whether a “flat” file is created with no block structure.https://cadviewer.com/autoxchangetechdocs/parameter_interface/dgn/Fri, 07 Aug 2020 01:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/dgn/DGN Only Parameters PARAMETER JSON Description WKSP Workspace Workspace file location SPATH ServerPath Workspace structure path Work Space PARAMETER WKSP Purpose This parameter sets the location of the MicroStation Workspace file. Use with SPATH parameter. Example -WKSP="/xampp/htdocs/cadviewer_6_1_0/content/dgn w Ref w workspace 2/ws2.txt" JSON {“WorkSpace” : “/xampp/htdocs/cadviewer_6_1_0/content/dgn w Ref w workspace 2/ws2.txt”} Alias None Use DGN Only Work Space Path PARAMETER SPATH Purpose This parameter sets the path pointing to the folder structure containing the DGN Workspace and its files and subdrawings.https://cadviewer.com/autoxchangetechdocs/parameter_interface/miscellaneous/Fri, 15 May 2020 05:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/miscellaneous/Miscellaneous Parameters PARAMETER JSON Description HIS Program History OL OutputList Output List Q Quiet Quiet Mode (No messages output) ? Parameter List History PARAMETER HIS[TORY] Purpose This parameter lists the various versions of AutoXChange 2022 and major items that changed with each version. This is a purely informational parameter Example -his Note If this parameter is used all other parameters are ignored and the program execution will stop after the history is given.https://cadviewer.com/autoxchangetechdocs/parameter_interface/light_palette/Sat, 06 Jun 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/light_palette/Index* Red Green Blue 1 255 255 255 2 255 0 0 3 255 255 0 4 0 255 0 5 0 255 255 6 0 0 255 7 255 0 255 8 0 0 0 9 128 128 128 10 192 192 192 11 255 0 0 12 255 127 127 13 165 0 0 14 165 82 82 15 127 0 0 16 127 63 63 17 76 0 0 18 76 38 38 19 38 0 0 20 38 19 19 21 255 63 0 22 255 159 127 23 165 41 0 24 165 103 82 25 127 31 0 26 127 79 63 27 76 19 0 28 76 47 38 29 38 9 0 30 38 23 19 31 255 127 0 32 255 191 127 33 165 82 0 34 165 124 82 35 127 63 0 36 127 95 63 37 76 38 0 38 76 57 38 39 38 19 0 40 38 28 19 41 255 191 0 42 255 223 127 43 165 124 0 44 165 145 82 45 127 95 0 46 127 111 63 47 76 57 0 48 76 66 38 49 38 28 0 50 38 33 19 51 255 255 0 52 255 255 127 53 165 165 0 54 165 165 82 55 127 127 0 56 127 127 63 57 76 76 0 58 76 76 38 59 38 38 0 60 38 38 19 61 191 255 0 62 223 255 127 63 124 165 0 64 145 165 82 65 95 127 0 66 111 127 63 67 57 76 0 68 66 76 38 69 28 38 0 70 33 38 19 71 127 255 0 72 191 255 127 73 82 165 0 74 124 165 82 75 63 127 0 76 95 127 63 77 38 76 0 78 57 76 38 79 19 38 0 80 28 38 19 81 63 255 0 82 159 255 127 83 41 165 0 84 103 165 82 85 31 127 0 86 79 127 63 87 19 76 0 88 47 76 38 89 9 38 0 90 23 38 19 91 0 255 0 92 127 255 127 93 0 165 0 94 82 165 82 95 0 127 0 96 63 127 63 97 0 76 0 98 38 76 38 99 0 38 0 100 19 38 19 101 0 255 63 102 127 255 159 103 0 165 41 104 82 165 103 105 0 127 31 106 63 127 79 107 0 76 19 108 38 76 47 109 0 38 9 110 19 38 23 111 0 255 127 112 127 255 191 113 0 165 82 114 82 165 124 115 0 127 63 116 63 127 95 117 0 76 38 118 38 76 57 119 0 38 19 120 19 38 28 121 0 255 191 122 127 255 223 123 0 165 124 124 82 165 145 125 0 127 95 126 63 127 111 127 0 76 57 128 38 76 66 129 0 38 28 130 19 38 33 131 0 255 255 132 127 255 255 133 0 165 165 134 82 165 165 135 0 127 127 136 63 127 127 137 0 76 76 138 38 76 76 139 0 38 38 140 19 38 38 141 0 191 255 142 127 223 255 143 0 124 165 144 82 145 165 145 0 95 127 146 63 111 127 147 0 57 76 148 38 66 76 149 0 28 38 150 19 33 38 151 0 127 255 152 127 191 255 153 0 82 165 154 82 124 165 155 0 63 127 156 63 95 127 157 0 38 76 158 38 57 76 159 0 19 38 160 19 28 38 161 0 63 255 162 127 159 255 163 0 41 165 164 82 103 165 165 0 31 127 166 63 79 127 167 0 19 76 168 38 47 76 169 0 9 38 170 19 23 38 171 0 0 255 172 127 127 255 173 0 0 165 174 82 82 165 175 0 0 127 176 63 63 127 177 0 0 76 178 38 38 76 179 0 0 38 180 19 19 38 181 63 0 255 182 159 127 255 183 41 0 165 184 103 82 165 185 31 0 127 186 79 63 127 187 19 0 76 188 47 38 76 189 9 0 38 190 23 19 38 191 127 0 255 192 191 127 255 193 82 0 165 194 124 82 165 195 63 0 127 196 95 63 127 197 38 0 76 198 57 38 76 199 19 0 38 200 28 19 38 201 191 0 255 202 223 127 255 203 124 0 165 204 145 82 165 205 95 0 127 206 111 63 127 207 57 0 76 208 66 38 76 209 28 0 38 210 33 19 38 211 255 0 255 212 255 127 255 213 165 0 165 214 165 82 165 215 127 0 127 216 127 63 127 217 76 0 76 218 76 38 76 219 38 0 38 220 38 19 38 221 255 0 191 222 255 127 223 223 165 0 124 224 165 82 145 225 127 0 95 226 127 63 111 227 76 0 57 228 76 38 66 229 38 0 28 230 38 19 33 231 255 0 127 232 255 127 191 233 165 0 82 234 165 82 124 235 127 0 63 236 127 63 95 237 76 0 38 238 76 38 57 239 38 0 19 240 38 19 28 241 255 0 63 242 255 127 159 243 165 0 41 244 165 82 103 245 127 0 31 246 127 63 79 247 76 0 19 248 76 38 47 249 38 0 9 250 38 19 23 251 0 0 0 252 45 45 45 253 91 91 91 254 137 137 137 255 183 183 183 256 179 179 179 * Internally, the index runs from 0 to 255 but has been listed in the conventional starting at 1 instead.https://cadviewer.com/autoxchangetechdocs/parameter_interface/dark_palette/Sat, 06 Jun 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/dark_palette/Index* Red Green Blue 1 0 0 0 2 255 0 0 3 255 255 0 4 0 255 0 5 0 255 255 6 0 0 255 7 255 0 255 8 255 255 255 9 128 128 128 10 192 192 192 11 255 0 0 12 255 127 127 13 204 0 0 14 204 102 102 15 153 0 0 16 153 76 76 17 127 0 0 18 127 63 63 19 76 0 0 20 76 38 38 21 255 63 0 22 255 159 127 23 204 51 0 24 204 127 102 25 153 38 0 26 153 95 76 27 127 31 0 28 127 79 63 29 76 19 0 30 76 47 38 31 255 127 0 32 255 191 127 33 204 102 0 34 204 153 102 35 153 76 0 36 153 114 76 37 127 63 0 38 127 95 63 39 76 38 0 40 76 57 38 41 255 191 0 42 255 223 127 43 204 153 0 44 204 178 102 45 153 114 0 46 153 133 76 47 127 95 0 48 127 111 63 49 76 57 0 50 76 66 38 51 255 255 0 52 255 255 127 53 204 204 0 54 204 204 102 55 153 153 0 56 153 153 76 57 127 127 0 58 127 127 63 59 76 76 0 60 76 76 38 61 191 255 0 62 223 255 127 63 153 204 0 64 178 204 102 65 114 153 0 66 133 153 76 67 95 127 0 68 111 127 63 69 57 76 0 70 66 76 38 71 127 255 0 72 191 255 127 73 102 204 0 74 153 204 102 75 76 153 0 76 114 153 76 77 63 127 0 78 95 127 63 79 38 76 0 80 57 76 38 81 63 255 0 82 159 255 127 83 51 204 0 84 127 204 102 85 38 153 0 86 95 153 76 87 31 127 0 88 79 127 63 89 19 76 0 90 47 76 38 91 0 255 0 92 127 255 127 93 0 204 0 94 102 204 102 95 0 153 0 96 76 153 76 97 0 127 0 98 63 127 63 99 0 76 0 100 38 76 38 101 0 255 63 102 127 255 159 103 0 204 51 104 102 204 127 105 0 153 38 106 76 153 95 107 0 127 31 108 63 127 79 109 0 76 19 110 38 76 47 111 0 255 127 112 127 255 191 113 0 204 102 114 102 204 153 115 0 153 76 116 76 153 114 117 0 127 63 118 63 127 95 119 0 76 38 120 38 76 57 121 0 255 191 122 127 255 223 123 0 204 153 124 102 204 178 125 0 153 114 126 76 153 133 127 0 127 95 128 63 127 111 129 0 76 57 130 38 76 66 131 0 255 255 132 127 255 255 133 0 204 204 134 102 204 204 135 0 153 153 136 76 153 153 137 0 127 127 138 63 127 127 139 0 76 76 140 38 76 76 141 0 191 255 142 127 223 255 143 0 153 204 144 102 178 204 145 0 114 153 146 76 133 153 147 0 95 127 148 63 111 127 149 0 57 76 150 38 66 76 151 0 127 255 152 127 191 255 153 0 102 204 154 102 153 204 155 0 76 153 156 76 114 153 157 0 63 127 158 63 95 127 159 0 38 76 160 38 57 76 161 0 63 255 162 127 159 255 163 0 51 204 164 102 127 204 165 0 38 153 166 76 95 153 167 0 31 127 168 63 79 127 169 0 19 76 170 38 47 76 171 0 0 255 172 127 127 255 173 0 0 204 174 102 102 204 175 0 0 153 176 76 76 153 177 0 0 127 178 63 63 127 179 0 0 76 180 38 38 76 181 63 0 255 182 159 127 255 183 51 0 204 184 127 102 204 185 38 0 153 186 95 76 153 187 31 0 127 188 79 63 127 189 19 0 76 190 47 38 76 191 127 0 255 192 191 127 255 193 102 0 204 194 153 102 204 195 76 0 153 196 114 76 153 197 63 0 127 198 95 63 127 199 38 0 76 200 57 38 76 201 191 0 255 202 223 127 255 203 153 0 204 204 178 102 204 205 114 0 153 206 133 76 153 207 95 0 127 208 111 63 127 209 57 0 76 210 66 38 76 211 255 0 255 212 255 127 255 213 204 0 204 214 204 102 204 215 153 0 153 216 153 76 153 217 127 0 127 218 127 63 127 219 76 0 76 220 76 38 76 221 255 0 191 222 255 127 223 223 204 0 153 224 204 102 178 225 153 0 114 226 153 76 133 227 127 0 95 228 127 63 111 229 76 0 57 230 76 38 66 231 255 0 127 232 255 127 191 233 204 0 102 234 204 102 153 235 153 0 76 236 153 76 114 237 127 0 63 238 127 63 95 239 76 0 38 240 76 38 57 241 255 0 63 242 255 127 159 243 204 0 51 244 204 102 127 245 153 0 38 246 153 76 95 247 127 0 31 248 127 63 79 249 76 0 19 250 76 38 47 251 51 51 51 252 91 91 91 253 132 132 132 254 173 173 173 255 214 214 214 256 255 255 255 *Internally, the index runs from 0 to 255 but has been listed in the conventional starting at 1 instead.https://cadviewer.com/autoxchangetechdocs/parameter_interface/dgnpalette/Sat, 06 Jun 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/dgnpalette/Index* Red Green Blue 1 0 0 0 2 255 0 0 3 255 255 0 4 0 255 0 5 0 255 255 6 0 0 255 7 255 0 255 8 255 255 255 9 128 128 128 10 192 192 192 11 255 0 0 12 255 127 127 13 204 0 0 14 204 102 102 15 153 0 0 16 153 76 76 17 127 0 0 18 127 63 63 19 76 0 0 20 76 38 38 21 255 63 0 22 255 159 127 23 204 51 0 24 204 127 102 25 153 38 0 26 153 95 76 27 127 31 0 28 127 79 63 29 76 19 0 30 76 47 38 31 255 127 0 32 255 191 127 33 204 102 0 34 204 153 102 35 153 76 0 36 153 114 76 37 127 63 0 38 127 95 63 39 76 38 0 40 76 57 38 41 255 191 0 42 255 223 127 43 204 153 0 44 204 178 102 45 153 114 0 46 153 133 76 47 127 95 0 48 127 111 63 49 76 57 0 50 76 66 38 51 255 255 0 52 255 255 127 53 204 204 0 54 204 204 102 55 153 153 0 56 153 153 76 57 127 127 0 58 127 127 63 59 76 76 0 60 76 76 38 61 191 255 0 62 223 255 127 63 153 204 0 64 178 204 102 65 114 153 0 66 133 153 76 67 95 127 0 68 111 127 63 69 57 76 0 70 66 76 38 71 127 255 0 72 191 255 127 73 102 204 0 74 153 204 102 75 76 153 0 76 114 153 76 77 63 127 0 78 95 127 63 79 38 76 0 80 57 76 38 81 63 255 0 82 159 255 127 83 51 204 0 84 127 204 102 85 38 153 0 86 95 153 76 87 31 127 0 88 79 127 63 89 19 76 0 90 47 76 38 91 0 255 0 92 127 255 127 93 0 204 0 94 102 204 102 95 0 153 0 96 76 153 76 97 0 127 0 98 63 127 63 99 0 76 0 100 38 76 38 101 0 255 63 102 127 255 159 103 0 204 51 104 102 204 127 105 0 153 38 106 76 153 95 107 0 127 31 108 63 127 79 109 0 76 19 110 38 76 47 111 0 255 127 112 127 255 191 113 0 204 102 114 102 204 153 115 0 153 76 116 76 153 114 117 0 127 63 118 63 127 95 119 0 76 38 120 38 76 57 121 0 255 191 122 127 255 223 123 0 204 153 124 102 204 178 125 0 153 114 126 76 153 133 127 0 127 95 128 63 127 111 129 0 76 57 130 38 76 66 131 0 255 255 132 127 255 255 133 0 204 204 134 102 204 204 135 0 153 153 136 76 153 153 137 0 127 127 138 63 127 127 139 0 76 76 140 38 76 76 141 0 191 255 142 127 223 255 143 0 153 204 144 102 178 204 145 0 114 153 146 76 133 153 147 0 95 127 148 63 111 127 149 0 57 76 150 38 66 76 151 0 127 255 152 127 191 255 153 0 102 204 154 102 153 204 155 0 76 153 156 76 114 153 157 0 63 127 158 63 95 127 159 0 38 76 160 38 57 76 161 0 63 255 162 127 159 255 163 0 51 204 164 102 127 204 165 0 38 153 166 76 95 153 167 0 31 127 168 63 79 127 169 0 19 76 170 38 47 76 171 0 0 255 172 127 127 255 173 0 0 204 174 102 102 204 175 0 0 153 176 76 76 153 177 0 0 127 178 63 63 127 179 0 0 76 180 38 38 76 181 63 0 255 182 159 127 255 183 51 0 204 184 127 102 204 185 38 0 153 186 95 76 153 187 31 0 127 188 79 63 127 189 19 0 76 190 47 38 76 191 127 0 255 192 191 127 255 193 102 0 204 194 153 102 204 195 76 0 153 196 114 76 153 197 63 0 127 198 95 63 127 199 38 0 76 200 57 38 76 201 191 0 255 202 223 127 255 203 153 0 204 204 178 102 204 205 114 0 153 206 133 76 153 207 95 0 127 208 111 63 127 209 57 0 76 210 66 38 76 211 255 0 255 212 255 127 255 213 204 0 204 214 204 102 204 215 153 0 153 216 153 76 153 217 127 0 127 218 127 63 127 219 76 0 76 220 76 38 76 221 255 0 191 222 255 127 223 223 204 0 153 224 204 102 178 225 153 0 114 226 153 76 133 227 127 0 95 228 127 63 111 229 76 0 57 230 76 38 66 231 255 0 127 232 255 127 191 233 204 0 102 234 204 102 153 235 153 0 76 236 153 76 114 237 127 0 63 238 127 63 95 239 76 0 38 240 76 38 57 241 255 0 63 242 255 127 159 243 204 0 51 244 204 102 127 245 153 0 38 246 153 76 95 247 127 0 31 248 127 63 79 249 76 0 19 250 76 38 47 251 51 51 51 252 91 91 91 253 132 132 132 254 173 173 173 255 214 214 214 256 255 255 255 *Internally, the index runs from 0 to 255 but has been listed in the conventional starting at 1 instead.https://cadviewer.com/autoxchangetechdocs/parameter_interface/dwfpalette/Sat, 06 Jun 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/dwfpalette/Index* Red Green Blue 1 0 0 0 2 128 0 0 3 0 128 0 4 128 128 0 5 0 0 128 6 128 0 128 7 0 128 128 8 192 192 192 9 192 220 192 10 166 202 240 11 0 0 0 12 0 0 51 13 0 0 102 14 0 0 153 15 0 0 204 16 0 0 255 17 0 51 0 18 0 51 51 19 0 51 102 20 0 51 153 21 0 51 204 22 0 51 255 23 0 102 0 24 0 102 51 25 0 102 102 26 0 102 153 27 0 102 204 28 0 102 255 29 0 153 0 30 0 153 51 31 0 153 102 32 0 153 153 33 0 153 204 34 0 153 255 35 0 204 0 36 0 204 51 37 0 204 102 38 0 204 153 39 0 204 204 40 0 204 255 41 0 255 0 42 0 255 51 43 0 255 102 44 0 255 153 45 0 255 204 46 0 255 255 47 51 0 0 48 51 0 51 49 51 0 102 50 51 0 153 51 51 0 204 52 51 0 255 53 51 51 0 54 51 51 51 55 51 51 102 56 51 51 153 57 51 51 204 58 51 51 255 59 51 102 0 60 51 102 51 61 51 102 102 62 51 102 153 63 51 102 204 64 51 102 255 65 51 153 0 66 51 153 51 67 51 153 102 68 51 153 153 69 51 153 204 70 51 153 255 71 51 204 0 72 51 204 51 73 51 204 102 74 51 204 153 75 51 204 204 76 51 204 255 77 51 255 0 78 51 255 51 79 51 255 102 80 51 255 153 81 51 255 204 82 51 255 255 83 102 0 0 84 102 0 51 85 102 0 102 86 102 0 153 87 102 0 204 88 102 0 255 89 102 51 0 90 102 51 51 91 102 51 102 92 102 51 153 93 102 51 204 94 102 51 255 95 102 102 0 96 102 102 51 97 102 102 102 98 102 102 153 99 102 102 204 100 102 102 255 101 102 153 0 102 102 153 51 103 102 153 102 104 102 153 153 105 102 153 204 106 102 153 255 107 102 204 0 108 102 204 51 109 102 204 102 110 102 204 153 111 102 204 204 112 102 204 255 113 102 255 0 114 102 255 51 115 102 255 102 116 102 255 153 117 102 255 204 118 102 255 255 119 153 0 0 120 153 0 51 121 153 0 102 122 153 0 153 123 153 0 204 124 153 0 255 125 153 51 0 126 153 51 51 127 153 51 102 128 153 51 153 129 153 51 204 130 153 51 255 131 153 102 0 132 153 102 51 133 153 102 102 134 153 102 153 135 153 102 204 136 153 102 255 137 153 153 0 138 153 153 51 139 153 153 102 140 153 153 153 141 153 153 204 142 153 153 255 143 153 204 0 144 153 204 51 145 153 204 102 146 153 204 153 147 153 204 204 148 153 204 255 149 153 255 0 150 153 255 51 151 153 255 102 152 153 255 153 153 153 255 204 154 153 255 255 155 204 0 0 156 204 0 51 157 204 0 102 158 204 0 153 159 204 0 204 160 204 0 255 161 204 51 0 162 204 51 51 163 204 51 102 164 204 51 153 165 204 51 204 166 204 51 255 167 204 102 0 168 204 102 51 169 204 102 102 170 204 102 153 171 204 102 204 172 204 102 255 173 204 153 0 174 204 153 51 175 204 153 102 176 204 153 153 177 204 153 204 178 204 153 255 179 204 204 0 180 204 204 51 181 204 204 102 182 204 204 153 183 204 204 204 184 204 204 255 185 204 255 0 186 204 255 51 187 204 255 102 188 204 255 153 189 204 255 204 190 204 255 255 191 255 0 0 192 255 0 51 193 255 0 102 194 255 0 153 195 255 0 204 196 255 0 255 197 255 51 0 198 255 51 51 199 255 51 102 200 255 51 153 201 255 51 204 202 255 51 255 203 255 102 0 204 255 102 51 205 255 102 102 206 255 102 153 207 255 102 204 208 255 102 255 209 255 153 0 210 255 153 51 211 255 153 102 212 255 153 153 213 255 153 204 214 255 153 255 215 255 204 0 216 255 204 51 217 255 204 102 218 255 204 153 219 255 204 204 220 255 204 255 221 255 255 0 222 255 255 51 223 255 255 102 224 255 255 153 225 255 255 204 226 255 255 255 227 0 0 0 228 13 13 13 229 26 26 26 230 40 40 40 231 53 53 53 232 67 67 67 233 80 80 80 234 93 93 93 235 107 107 107 236 120 120 120 237 134 134 134 238 147 147 147 239 161 161 161 240 174 174 174 241 187 187 187 242 201 201 201 243 214 214 214 244 228 228 228 245 241 241 241 246 255 255 255 247 255 251 240 248 160 160 164 249 128 128 128 250 255 0 0 251 0 255 0 252 255 255 0 253 0 0 255 254 255 0 255 255 0 255 255 256 255 255 255 * Internally, the index runs from 0 to 255 but has been listed in the conventional starting at 1 instead.https://cadviewer.com/autoxchangetechdocs/parameter_interface/extendedparameters-uic/Sun, 22 Mar 2020 15:26:15 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/extendedparameters-uic/The following parameters defines the specific methods used to manage UIC (University of Chicago) content. UIC Parameters UIC Create a UIC Custom-formatted JSON file UICDRAWINGS Create UIC-specific Drawings with Shaded areas and Legends UICSCAN Create UIC-specific search.json file for all DWG files in the Input Directory LAYOUT Extension to the standard Layout parameter for UIC layouts UIC Data PARAMETER UIC Purpose This parameter controls whether the UIC JSON Data File is created from a CSV or Excel file Example -UIC Alias -UICDATA Required dwg_room_attr_with_dp_names.https://cadviewer.com/autoxchangetechdocs/parameter_interface/extendedparameters-lod/Wed, 28 Jan 2026 01:10:49 +0000https://cadviewer.com/autoxchangetechdocs/parameter_interface/extendedparameters-lod/LOD Parameters LOD Create LOD set with LOD and SITE LOD Layouts LODID Designates the ID of the location for which to create the LOD DIMENSIONLAYER Defines the Layer to search for Polylines to Dimension TEXTLAYER Defines the Layer to search for Text/MText Room IDs LOD Creation PARAMETER LOD Purpose This parameter controls whether a Lease Outline Drawing (LOD) is created. The resulting SVG will consist of two layouts: LOD and SITE LOD Example -LOD Alias -f= *LOD* Use The existing Layouts, LOD and SITE LOD, are dimensioned and output.https://cadviewer.com/autoxchangetechdocs/entry/hello_world2/Sun, 17 Dec 2017 14:00:45 +0000https://cadviewer.com/autoxchangetechdocs/entry/hello_world2/aaaaaa vvvv aaahttps://cadviewer.com/autoxchangetechdocs/entry/hello_world1/Fri, 17 Nov 2017 14:00:45 +0000https://cadviewer.com/autoxchangetechdocs/entry/hello_world1/aaaaaa vvvv aaahttps://cadviewer.com/autoxchangetechdocs/entry/hello_world/Tue, 17 Oct 2017 14:00:45 +0000https://cadviewer.com/autoxchangetechdocs/entry/hello_world/aaaaaa vvvv aaa